Agaaz Ophthalmics › Intraocular Lenses
IOL manufacturer · Ahmedabad, India
Agaaz Ophthalmics intraocular lenses: manufactured in India
Agaaz Ophthalmics is an Indian manufacturer of intraocular lenses (IOLs), ophthalmic viscoelastics and solutions for cataract surgery. Its manufacturing facility is located in Narol (Ahmedabad, Gujarat). The company has operated since 2009, holds a CDSCO (India) medical device manufacturing licence and exports to more than 15 countries.
In brief: Agaaz manufactures six IOL platforms — a hydrophobic aspheric lens (OP-VIEW AS), a three-piece hydrophobic lens (TRICENTRA), two hydrophilic aspheric lenses (OP-FOLD AS, i-Nera), an extended depth of focus (EDOF) lens (X-VIZ) and a rigid PMMA lens (OP-LENS). Below are the technical parameters of each model as published by the manufacturer, together with contacts for distributors and clinics.
Intraocular lens range
Parameters are given according to published Agaaz specifications. Full constant tables, dioptre availability and ordering codes are provided on request together with the instructions for use (IFU).
| Model | Type | Optic material | Key parameters |
|---|---|---|---|
| OP-VIEW AS | Monofocal foldable, aspheric | Hydrophobic acrylic | Refractive index 1.557; 360° sharp optic edge; +5.0 to +30.0 D in 0.5 D steps; UV and blue-light filter; glass transition temperature 11.4 °C, elastic modulus 2.9 MPa |
| TRICENTRA | Three-piece foldable, aspheric | Hydrophobic acrylic, PMMA haptics | 6.0 mm optic; overall length 13.0 / 14.0 mm; +5.0 to +30.0 D in 0.5 D steps; nominal A-constant 118.0; refractive index 1.493; minimum incision 2.6 mm; 360° sharp edge; benzotriazole UV absorber |
| OP-FOLD AS | Foldable, aspheric | Hydrophilic acrylic | Aspheric optic; sharp (square) edge as a barrier to posterior capsule opacification; the most widely used IOL in the Agaaz range |
| i-Nera | Foldable, aspheric | Hydrophilic acrylic | 6.0 mm optic; overall length 13.0 mm; modified C-loop haptics; injector delivery, including a preloaded option |
| X-VIZ | Extended depth of focus (EDOF) IOL | As per brochure | Designed for distance and intermediate vision; aspheric optical profile; full dioptre range and constants are given in the manufacturer's brochure |
| OP-LENS | Rigid monofocal | PMMA | Refractive index 1.42; +5.0 to +30.0 D; optic 5.5 / 6.0 mm; overall diameter 12.5 mm; clear and yellow (blue-light filtering) versions; ethylene oxide sterilisation; for manual small-incision cataract surgery (MSICS) and ECCE with a 5.5–6.0 mm incision |
The model pages linked in the table also list independent peer-reviewed publications for each device class (these are publications on the IOL class, not studies of Agaaz products).
Three materials, three clinical profiles
Agaaz manufactures IOLs in all three main materials. The choice between them depends on surgical technique, ocular comorbidity and programme economics, not only on the price of the lens.
| Parameter | PMMA (OP-LENS) | Hydrophilic acrylic (OP-FOLD AS, i-Nera) | Hydrophobic acrylic (OP-VIEW AS, TRICENTRA) |
|---|---|---|---|
| Typical incision | 5.5–6.0 mm (MSICS, ECCE) | 2.2–2.8 mm | 2.2–2.8 mm |
| Water content | 0% | 18–38% | approx. 0.5% |
| Posterior capsule opacification (PCO) | Low | Higher than hydrophobic acrylic in randomised trials | Low |
| Late material changes | Not typical | Calcification reported, particularly after injection of gas or air into the anterior chamber | Glistenings possible, usually without loss of visual acuity |
Detailed review with references: hydrophobic vs hydrophilic IOLs — what is the difference. On extended depth of focus lenses: EDOF IOLs — how they work and how they compare with trifocals.
For distributors, clinics and procurement teams
Technical documentation
Specifications, instructions for use (IFU), material and sterilisation data — available on request for each model.
Evaluation samples
Samples for technical evaluation by surgeons and distributors are shipped by arrangement.
Contract manufacturing
Manufacturing under the partner's brand (private label) — learn more.
Related products
Viscoelastics, trypan blue, intracameral moxifloxacin, ophthalmic knives — full portfolio.
Frequently asked questions
Where are Agaaz intraocular lenses manufactured?
At Agaaz Ophthalmics' own manufacturing facility in Narol, Ahmedabad, Gujarat, India. The company holds a medical device manufacturing licence from CDSCO, India's national regulator.
What materials are Agaaz IOLs made of?
Hydrophobic acrylic (OP-VIEW AS, TRICENTRA), hydrophilic acrylic (OP-FOLD AS, i-Nera) and PMMA (OP-LENS). The material of X-VIZ is stated in the manufacturer's brochure.
What dioptre range is available?
A range of +5.0 to +30.0 D is published for OP-VIEW AS, TRICENTRA and OP-LENS, in 0.5 D steps for OP-VIEW AS and TRICENTRA. Exact availability for each model is given in the price list and catalogue.
Does Agaaz offer a three-piece hydrophobic lens?
Yes, TRICENTRA: a 6.0 mm hydrophobic acrylic optic with two PMMA haptics, overall length 13.0 or 14.0 mm, nominal A-constant 118.0.
Does Agaaz work with distributors?
Yes. The company supplies distributors and clinics in a number of countries and welcomes new partners. Supply terms, documentation and registration matters are discussed individually.
Enquiry for distributors and clinics
Tell us which IOL models and volumes you are interested in, and we will send specifications, documentation and a commercial offer.
info@agaaz.lifeEnquiry formPhone / WhatsApp: +91 98241 64173 · 4th Floor, Narayan Arcade, Narol, Ahmedabad, Gujarat 382405, India
The information on this page is intended for healthcare professionals and medical device buyers, is provided for reference only and does not constitute a public offer. The registration status of products and the terms of supply in a specific country are discussed with partners individually. See also: Intraocular lens manufacturer, India.
